Welcome
Guest
, you are in:
<root>
•
Login
Navigation
¶
Getting Started
Deployment
Equipment Help
Install Wiring Diagrams
Contact Us
Support Tickets
Technician Login
Create a new Page
All Pages
Categories
Navigation Paths
Administration
File Management
Create Account
Search the wiki
»
Back
Sierra Wireless Modem Configuration (AirLink series)
The following procedure will configure AirLink based modems to report their position data to the GPS Logic AVL system. '''Note: ''' Prior to configurating the device, have the following on hand to prior to attempting configuration of the modem. ((( * Modem IP Address ** If configuring remotely, this will be the cellular IP ** If configuring locally, this is by default 192.168.13.31 * GPS Logic AVL Server IP Address * GPS Logic AVL Server Port (Typically 22335) * GPS Logic APN: '''we01.vzwstatic''' ))) # Ensure the modem is powered up completely and connected to a computer using an ethernet cable. # Access the modem's configuration options by opening a browser and entering the modem's public IP address in the format {{http://<nowiki>[ip address]</nowiki>:9191}}, then press enter. A modem with IP address 192.168.13.31 would use the URL {{http://192.168.13.31:9191}} (this is the default IP address for most Airlink modems). # When prompted for a user name and password, enter the user name {{'''user'''}} and password {{'''12345'''}}, then press enter. # Upon successful login, the following page will be presented: [image||{UP}/img/airlink/home.png] # Obtain the modem ID by selecting '''About''' from the home page, then note the '''Device ID''' field value. The digits following the {{0x000001}} prefix must be entered in the ESN field of your GPS Logic AVL system for your modem. [image||{UP}/img/airlink/deviceId.png] # Configure the modem to use a static IP address by selecting the '''WAN/Cellular''' tab, then entering '''we01.vzwstatic''' for the '''User Entered APN'''. [image||{UP}/img/airlink/apn.png] # Click the '''Apply''' button to save the new APN settings. # Configure the modem to report its position data to the GPS Logic server by selecting the '''GPS''' tab of the modem's web page, then check the boxes below and enter the respective values: [image||{UP}/img/airlink/gps.png] # Click the '''Apply''' button. # Click the '''Reboot''' link on the upper right of the web configuration page. # If not already done, enter the device ID obtained in Step 4 on the Modem's page of your GPS Logic web site. {cloud}
Meta Keywords:
AirLink, Modems, Sierra Wireless
Meta Description:
Configuration instructions for AirLink modems
Change Comment:
Wiki version 3.0.4.560.